-45%
Sold Out
,

QNAP TS-h973AX 9-Bay NAS Enclosure

QNAP
Availability:

Out of stock


120,803 218,300

Out of stock

Compare
  • 5 x 3.5″ and 2 x 2.5″ SATA Drive Bays
  • 2 x U.2 NVMe PCIe / SATA 2.5″ Drive Bays
  • 2.2 GHz AMD Ryzen V1500B Quad-Core
  • 8GB of DDR4 RAM
  • 1 x 10GbE and 2 x 2.5GbE Ports
  • USB 3.2 Gen 2 Type-C and Type-A Ports
  • RAID 0, 1, 5, 6, 10, 50, 60, and JBOD
  • AES 256-Bit Volume Encryption
  • QuTS Hero 4.5 Operating System

    General Features

    AMD Ryzen Performance with up to 32GB of RAM

    Powered by an AMD Ryzen V1000 series V1500B 4-core/8-thread, 2.2 GHz processor with up to 32GB of DDR4 RAM, the TS-h973AX delivers aggressive yet power-smart performance for compute-demanding applications. AES-NI encryption support boosts encryption performance while also maintaining the security of your NAS data. SSDs can be flexibly installed for cache acceleration to maximize network and storage performance for data-intensive applications.

    Dual U.2 NVMe PCIe Gen 3 x4 SSD Slots for Enhanced I/O and Low Latency

    The TS-h973AX has four 2.5″ SSD slots, with slots 1 and 2 supporting both high-performance U.2 NVMe PCIe Gen 3 x4 SSDs or economical SATA III 6Gb/s SSDs. For tackling latency-sensitive applications, you can take advantage of U.2 NVMe PCIe Gen 3 x4 SSDs that supply up to 32 Gb/s bandwidth to attain optimized performance and efficiency. You can also use QNAP’s QDA-UMP adapter to replace U.2 NVMe SSDs with cost-efficient M.2 NVMe Gen 3 x4 SSDs to maintain high-level performance while saving more costs.

    Coupled with QNAP’s SSD-aware features, the TS-h973AX maximizes performance with high cost-effectiveness.

    SSD Cache Acceleration
    Increases IOPS performance and reduces latency for storage volumes – good for IOPS-demanding applications including virtualization and databases.

    Write Coalescing
    Transforms all random writes to sequential writes along with reduced I/O, effectively increasing SSD write performance.

    Pool Over-Provisioning
    Flexibly reserves a dedicated space in an SSD storage pool to allow new data to be written into a complete block even if the pool is almost full, thus improving the performance of fragmented pools.

    Streamline Large Files Transfers and Video Editing with 10GbE and 2.5GbE

    The TS-h973AX has one 10GBASE-T Multi-Gig (10G/5G/2.5G/1G/100M) port and two 2.5GbE RJ45 (2.5G/1G/100M) ports, providing out-of-the-box support for high-speed networking and supporting Port Trunking and Failover to reinforce your network infrastructure. QNAP also provides many other high-speed networking solutions, including 10GbE/2.5GbE managed/unmanaged switches, 2.5GbE/5GbE/10GbE PCIe cards, and USB 5GbE adapters for Windows/Linux workstations, allowing you to build a budget-friendly high-speed network environment for productive team collaboration.
SKU: TS-h973AX-8G Categories: , Tags: , ,
Weight 6 kg
Brand

QNAP

CPU AMD Ryzen™ Embedded V1500B 4-core/8-thread 2.2 GHz processor
CPU Architecture 64-bit x86
Floating Point Unit
Encryption Engine  (AES-NI)
System Memory 32 GB SO-DIMM DDR4 (2 x 16 GB)
Maximum Memory 64 GB (2 x 32 GB)
Memory Slot 2 x SO-DIMM DDR4
Support optional ECC memory

For dual-DIMM configuration, you must use a pair of identical DDR4 modules.
Flash Memory 5GB (Dual boot OS protection)
Drive Bay 5 x 3.5-inch + 4 x 2.5-inch

The system is shipped without HDD/SSD.
Drive Compatibility 3.5-inch bays:
3.5-inch SATA hard disk drives
2.5-inch SATA hard disk drives
2.5-inch SATA solid state drives

2.5-inch bays:
2.5-inch SATA hard disk drives
2.5-inch SATA solid state drives
2.5-inch U.2 NVMe PCIe Gen3 x4 solid state drives (2.5-inch Bay #1 & #2)

* 2.5-inch bay #1 & #2 support either U.2 NVMe SSDs or SATA 6Gb/s SSDs.
** U.2 NVMe solid-state drives can only be installed in 2.5-inch bay numbers 1 and 2. Installing these drives in other bays will damage the drive connectors.
Hot-swappable
SSD Cache Acceleration Support
2.5 Gigabit Ethernet Port (2.5G/1G/100M) 2 (2.5G/1G/100M)
5 Gigabit Ethernet Port (5G/2.5G/1G/100M) Optional via the QNA-UC5G1T USB to 5GbE network adapter
10 Gigabit Ethernet Port 1 x 10GBASE-T (10G/5G/2.5G/1G/100M)
Wake on LAN (WOL)
Jumbo Frame
USB 3.2 Gen 2 (10Gbps) Port 1 x Type-C USB 3.2 Gen 2
3 x Type-A USB 3.2 Gen 2
Form Factor Tower
LED Indicators HDD 1-5, SSD 1-4, Power/Status, LAN, USB
Buttons Power, Reset, USB Copy
Dimensions (HxWxD) 182.65 × 224.6 × 224.1 mm
Weight (Net) 3.52 kg
Weight (Gross) 5.12 kg
Operating Temperature 0 – 40 °C (32°F – 104°F)
Storage Temperature -20 – 70°C (-4°F – 158°F)
Relative Humidity 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)
Power Supply Unit External, 120 W, AC 100 to 240 V
Power Consumption: HDD Sleep Mode 41.2 W
Power Consumption: Operating Mode, Typical 55.41 W

Tested with drives fully populated.
Fan 1 x 140mm, 12VDC
System Warning Buzzer
Kensington Security Slot
Max. Number of Concurrent Connections (CIFS) – with Max. Memory 2000

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

Q & A

There are no questions yet

Ask a question

Your question will be answered by a store representative or other customers.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

Warning

An error occurred when saving your answer. Please report it to the website administrator. Additional information:

You were not leaving your cart just like that, right?

Enter your details below to save your shopping cart for later. And, who knows, maybe we will even send you a sweet discount code :)