- 4 x 3.5″/2.5″ SATA III Drive Bays
- 2.0 GHz Intel Celeron J4125 Quad-Core
- 4GB of DDR4 RAM
- 2 x 2.5 Gigabit Ethernet Ports
- 2 x USB 3.2 Gen 1 | 3 x USB 2.0 | HDMI
- RAID 0, 1, 5, 6, 10, JBOD, and Single
- Data Transfer Speeds up to 686 MB/s
- AES-NI Hardware Encryption Engine
- PCIe Gen 2.0 x2 Expansion Slot
- QNAP QTS 4.4.2 OS
Upgrade Your NAS to 2.5GbE NetworksThe TS-453D comes with two 2.5GbE RJ45 LAN ports that allow you to use existing Cat 5e cables to upgrade network speeds from 1 Gigabit to 2.5 Gigabit. The dual 2.5GbE ports also support Port Trunking for up to 5 Gb/s. By using QNAP’s N-BASET/Multi-Gig USB 3.2 Gen 1 to 5GbE adapter (QNA-UC5G1T) or 5GbE PCIe expansion card (QXG-5G1T-111C), your laptop or desktop computer can easily connect to 2.5GbE networks with the TS-453D to benefit from higher network speeds.
Transform Your Network with a 2.5GbE SwitchUpgrading your network shouldn’t break the bank, and 2.5GbE connectivity provides immediately noticeable improvements compared to standard 1GbE. The QSW-1105-5T is an unmanaged switch with five 2.5GbE ports (backwards compatible with 1G/100M) and supports CAT5e cables to connect multiple computers and NAS. The QSW-1105-5T is energy-saving, low-noise, plug-and-use, and supports loop detection and blocking to provide a simple and effective high-speed network environment.
2.0 GHz Intel Celeron J4125 Quad-Core Processor with 4GB MemoryThe TS-453D is powered by a 2.0 GHz Intel Celeron J4125 Quad-Core processor (bursts up to 2.7 GHz), features 4GB of DDR4 memory, and supports SATA III 6 Gb/s drives. The support of the Intel AES-NI encryption engine boosts encryption performance while also maintaining the security of your NAS data. You can flexibly install SSDs for cache acceleration to maximize network and storage performance for data-intensive applications.
Windows and Mac BackupUse the license-free QNAP NetBak Replicator utility to back up and restore files from Windows computers. Apple’s Time Machine is supported for backing up Mac computers.
Snapshots for Volume and LUNSnapshots are essential for NAS data protection, and their block-level feature makes it a dependable data protection method in the face of growing ransomware threats. The TS-453D supports up to 256 snapshots per volume/LUN, and up to 1024 snapshots per NAS.
One 2.5GbE Is Better than Two 1GbE for Increasing HBS Backup EfficiencyWith a single 2.5GbE connection, no complex link aggregation settings are required for speeds up to 312.5 MB/s, which easily beats a paired 1GbE connection. The TS-453D has two 2.5GbE ports, further doubling performance and increasing efficiency for versatile tasks.
Hybrid Backup Sync (HBS) consolidates backup and synchronization functions for easily transferring data from the TS-453D to local, remote, and cloud storage spaces. HBS also supports QuDedup technology which removes duplicated data at the source, further accelerating backup and restoration tasks over 2.5GbE connections.
Abundant I/O Capability with PCIe ExpansionThe TS-453D features one PCIe 2.0 slot that allows for various expansion cards for expanding application potential.
5GbE/10GbE Network Card
Enable fast throughput for bandwidth-demanding tasks, such as virtualization, massive data transmission, and fast backup/restoration.
QM2 M.2 SSD/10GbE Card
Adds M.2 SSD caching or 10GbE connectivity to the NAS for optimized performance and bandwidth.
Wi-Fi 6 Wireless Adapter
Install a PCIe Wi-Fi 6 (802.11ax) network adapter, based on the Intel AX200, in your NAS to create a Wi-Fi 6 network environment.
Turn your NAS into a wireless access point or a base station by installing a QNAP QWA-AC2600 wireless adapter and the WirelessAP Station app.
SSD Caching and Auto-Tiering Enable 24/7 Optimized Storage EfficiencyWhile SSD prices continue to fall, and SSD capacity and performance continue to increase, organizations can easily take advantage of SSD strengths. The TS-453D supports numerous SSD-aware features that significantly maximize NAS performance with high cost-effectiveness.
|CPU||Intel® Celeron® J4125 4-core/4-thread processor, burst up to 2.7 GHz|
|CPU Architecture||64-bit x86|
|Graphic Processors||Intel® HD Graphics 600|
|Floating Point Unit|
|System Memory||8 GB SO-DIMM DDR4 (2 x 4 GB)|
|Maximum Memory||8 GB (2 x 4 GB)|
|Memory Slot||2 x SO-DIMM DDR4
For dual-DIMM configuration, you must use a pair of identical DDR4 modules.
|Flash Memory||4GB (Dual boot OS protection)|
|Drive Bay||4 x 3.5-inch SATA 6Gb/s, 3Gb/s
The system is shipped without HDD.
|Drive Compatibility||3.5-inch SATA hard disk drives
2.5-inch SATA hard disk drives
2.5-inch SATA solid state drives
|M.2 Slot||Optional via a PCIe adapter|
|SSD Cache Acceleration Support|
|2.5 Gigabit Ethernet Port (2.5G/1G/100M)||2 (2.5G/1G/100M/10M)|
|5 Gigabit Ethernet Port (5G/2.5G/1G/100M)||Optional via PCIe expansion card|
|10 Gigabit Ethernet Port||Optional via PCIe expansion card
Optional via PCIe expansion card
|Wake on LAN (WOL)||
Only the 2.5GbE port
Slot 1: PCIe Gen 2 x2
PCIe bandwidth limitations will restrict the NAS 10GbE performance.
|USB 2.0 port||3|
|USB 3.2 Gen 1 port||2|
|USB 3.2 Gen 2 (10Gbps) Port||Optional via a PCIe adapter|
|IR Sensor||(Optional QNAP RM-IR004 remote control)|
|HDMI Output||1, HDMI 2.0 (up to 4096 x 2160 @ 60Hz)|
|LED Indicators||Power/Status, LAN, USB, HDD1-4|
|Buttons||Power, USB copy, Reset|
|Dimensions (HxWxD)||168 × 170 × 226 mm|
|Weight (Net)||2.26 kg|
|Weight (Gross)||3.6 kg|
|Operating Temperature||0 – 40 °C (32°F – 104°F)|
|Storage Temperature||-20 – 70°C (-4°F – 158°F)|
|Relative Humidity||5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)|
|Power Supply Unit||90W adapter (12VDC), 100-240VAC|
|Power Consumption: HDD Sleep Mode||11.3 W|
|Power Consumption: Operating Mode, Typical||25.98 W
Tested with drives fully populated.
|Fan||1 x 120mm, 12VDC|
|Kensington Security Slot|
|Max. Number of Concurrent Connections (CIFS) – with Max. Memory||1500|
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Q & A
There are no questions yet
There are no reviews yet.